|
|||||||||||
|
Available for PRE-ORDER ONLY
Units available late 2011.
Novation TWITCH is a DJ controller with a completely new take on DJing. It has Touchstrips to navigate tracks and you can slice-up your beats and mix them back together – totally on the fly. TWITCH has a built in audio interface which is absolutely rock-solid with headphone, booth and main outputs.
Take hold of your music:
TWITCH has Touchstrips; simply grab your tracks and swipe them backwards and forwards like a touchscreen. The performance modes create totally new ways to manipulate beats and breaks. The control surface - with its 2 x 8 large Triggerpads and Fader FX - opens up awesome possibilities for digital DJs and the new breed of Controllerists.
It comes with Serato ITCH – powerful DJ software that only works with select hardware controllers. As well as being rock-solid and simple to use, ITCH has totally new performance tools that take digital DJing to the next level. TWITCH has been developed with Serato to put ITCH’s full potential right at your fingertips. It also maps to other DJ software like Traktor and Ableton.
TWITCH can put your music in time, leaving you free to get creative - Serato ITCH software can beat match tracks so you can focus on performing - TWITCH gives you hands-on control of some powerful performance tools Touchstrips for navigating tracks - Swipe tracks backwards and forwards as if you were touching the screen - You can instantly ‘Drop’ into a tune at any point in the track ‘Slicer’ Performance Mode - Slicer allows you to chop-up beats in time and re-arrange them on the fly - 2 x 8 large Triggerpads let you to play eight rolling beat slices in any order Tough and compact with a 2 in 4 out high-quality audio interface - Designed for gigging: Compact casing, bus powered with LED buttons - Balanced outputs, ultra-reliable audio/MIDI drivers and microphone input Master FX and ‘Fader FX Mode’ - Add different effects to either or both channels with TWITCH's FX section - Use both channel faders for super-fast FX moves and tricks Trigger Hot Cue Points and 2 different Loop Modes - 8 large Triggerpads can fire off 8 cue-points anywhere in your track - Trigger 8 different loop lengths and save them with your performance Hardware Specifications Mixer section: 8x pots: EQ and trim 2x channel faders 1x replaceable crossfader 2x Continuous rotary encoders 2x headphone assign buttons - enables respective deck in the cue mix 2x Fader FX assign buttons Master section: 4x pots Headphone level Master/cue mix Booth level Master output Controls per deck: Touchstrip with swipe and drop modes Continuous rotary encoder for pitch +/- Cue button Play/Pause button 8x Large Triggerpads 4x performance mode selector buttons 2x Beatgrid buttons 2x sync/keylock buttons Master FX section: 1x Pot 2x continuous rotary encoders - right hand is also tap tempo/left hand is pressing makes for secondary parameter control 6x FX select buttons Mic/Aux input section: 1x pot 1x on/off button 1x assign to headphones button Audio Interface - 24bit at 44.1/48KHz: 2x master outs (L/R) on balanced TRS jacks 2x booth outs (L/R) on phono jacks 2x aux input (L/R) on phono jacks 1x aux gain pot 1x direct monitoring switch 1x mic input on TRS jack 1x mic gain pot 2x headphone outputs (1x TRS jack & 1x 3.5mm jack) both can be used simultaneously) 1x Master/cue switch to change signal going out of Booth outputs between cue & main 1x direct monitoring output - bypasses the software and passes mic/aux input straight to the main outs Audio performance Key Performance Figures Real World ADC Dynamic Range: 102 dB (A-weighted) Real World DAC Dynamic Range: 100 dB (A-weighted) Chipset ADC/DAC Dynamic Range: 114 dB (A-weighted) Latency (Minimum Buffer Size): 77 Samples Microphone Inputs • Dynamic Range (A-Weighted): 102dB • Frequency Response: 20Hz - 20kHz +/- 0.1 dB • THD+N: 0.01% (measured at 1kHz with a 20Hz/22kHz bandpass filter) • Noise: EIN >120dBu (measured with 50dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter) • Maximum Input level @ Minimum gain for 0 dBFS: +4 dBu??Line Inputs • Dynamic Range (A-Weighted): 102dB • Frequency Response: 20Hz - 20kHz +/- 0.1dB • THD+N: < 0.002% (measured with 0dBFS input and 22Hz/22kHz bandpass filter) • Noise: -92dBu (22Hz/22kHz bandpass filter) Analogue Audio Outputs (¼" TRS) • Electronically balanced output • Maximum Output Level (0dBFS): +7.0dBu • THD+N: 0.0075% (-1dBFS output, 20Hz/22kHz bandpass filter) Analogue Audio Outputs (RCA phono) • Unbalanced output • Maximum output level (0dBFS): +7.0dBu • THD+N: 0.0075% (-1dBFS output, 20Hz/20kHz bandpass filter)??Headphone Outputs • Frequency Response: 20Hz-20KHz +/- 0.1dB • Dynamic Range: 102dB • SNR (A-weighted): 102dB • Maximum Output into 32R: +3dBu (-1.4dBV) • Power into 32R: 24mW • Output Impedance: < 7Ohms • Load Impedance: > 24Ohms
|
|||||||||||





